Air conditioners and heat pumps are the common household items and these items require maintenance on time. In order to save your repair and maintenance expenses here are some common household tips to service and repair them. Some of the tips are given below for repair and maintenance of your AC and heat pumps.
1. Regularly check and replace the AC filter
If you really understand the importance of air conditioning in your home then you need to change or replace the filter of the AC. Clogged or dirty filters a major cause of AC problems which causes blocked air flow and can be costly to repair. It would be better to replace the filter regularly rather than to spend time in searching the spares for your AC. By doing so, you will also spare yourself the DIY repair effort.
If you own a split AC which is making lots of noise, you must switch it off and open the main indoor unit to locate the two air filters. You can take them out and wash them gently. For best and optimal results, you must clean the dirt and residue present on the filters by a tooth-brush. Once the filters are completely dry, you can reinstall them. Cleaning filters can increase the efficiency of the unit and also reduce the electricity bills. You will see a significant reduction in the noise also. It is critical to repeat this process after every 3 months.
2. Check the AC breaker
Sometimes it is easy to assume that your AC unit is has malfunctioned or gone dead when it is simply the breaker that has tripped. In such a case, the unit will not operate or respond at all. Before you even proceed to call a repair technician you must be sure to check the breaker first and ensure that power is actually being transmitted to the unit. If some other appliances are drawing power from the same breaker then it will most likely not be operating as well. This important check can be vital in saving you the repair technician money and frustration.
3. Look at the AC thermostat
The AC thermostat is the device or control unit that regulates the cooling temperatures or conditions for your air conditioning unit. If your AC is working but not cooling well, the problem could be coming from the thermostat or its settings. The thermostat batteries could have gone dead, in which case you will need to replace them.
4. Clean your Air Conditioner
Cleaning is always part of appliance maintenance and repair. Sometimes AC units accumulate dirt, which can interfere with the way the unit functions or disrupt performance. In such a case, repair may not be necessary. Cleaning should be done when the system is off. You can also examine the ducts to see if air is coming through them and clean any dirt away. Also, any ice accumulated on the device by running just the fan.
5. Maintain optimum temperature
The temperature of the AC unit must match with the season and the size of the room. It will help to maintain the efficiency levels of the unit.
6. If the AC is not switching on
7. AC is leaking water
1. Heating Issues
Due to the continuous running of indoor fans, the performance and energy efficiency levels of the pump degrades. You must consider installing a programmable thermostat with multistage functions to monitor the temperature levels.
2. Reduced airflow
Maintaining and cleaning the filters can help to eliminate this issue. If you are technically confident then you can also clean the fans and coils to maximize the performance levels.
Conclusion
As AC and heat pumps are complex HVAC unit so you should try the above tips for minor AC and heating repair work. If there are some complex issues like motor issues or regular water leaks then you must call an HVAC certified professional to diagnose and resolve any performance issues. You can even schedule a service and maintenance session of the units after every three months to maintain optimal performance levels.